Dental Implant Motor with Torque Control: Range, Speed and Safety

Publication Date: 2026-11-18

The dental implant motor with torque control from JERRY is the Electric Dental Implant Torque Wrench i Motor, a cordless unit for implant screw placement. The product page lists an adjustable torque range of 10 to 50 N.cm, an adjustable speed of 10 to 50 rpm and a 20:1 contra angle designed for implant work. It also lists forward and reverse operation, an automatic stop when the set torque is reached, 16 universal screwdrivers and a self calibration function. For an implant clinic, those are the values that decide whether the motor can follow the torque protocol of the implant system in use.

Torque Range and Automatic Stop

The motor adjusts from 10 to 50 N.cm, and the page says it stops automatically once the set torque is reached. That stop function matters because an implant driver should not keep turning after the target value is met. The adjustment is presented as a range, not as a set of fixed presets, so the operator sets the value for the case and checks it before the surgery. The page does not list a calibration interval or an accuracy figure in percent, and those two points should be requested from the supplier together with the manual. A clinic that follows a specific implant brand protocol should confirm that the range covers the values the protocol calls for.

Speed, Contra Angle and Direction

The speed range is 10 to 50 rpm, and the contra angle ratio is 20:1, which the page describes as especially designed for implant. The motor runs forward to fasten the screw and reverse to remove it. The 20:1 ratio and the low speed suit the controlled insertion of an implant, while the reverse mode helps if a screw has to be backed out. The page calls the 20:1 contra angle patented. A buyer should confirm that the contra angle fits the handpiece connection and the drivers already used in the clinic, because a ratio change affects the displayed speed and the feel of the procedure.

Drivers, Calibration and Chip

The package includes 16 universal screwdrivers, and the page lists a self calibration function for torque accuracy. The motor uses USA chips, according to the product description, and the head moves through 360 degrees for easier access. A self calibration function is useful only if the clinic knows when to run it and what reference it uses, so the manual should be checked before the first case. The page does not give the driver sizes or the connection type for each driver, and a clinic that uses a specific implant system should ask for the matching set. The 360 degree head helps in the posterior region, where the handpiece angle is often restricted.

Battery, Charging and Packing

The motor uses a battery described as having a 3 to 5 year lifetime, and it charges through a Type C connection. The net weight is 0.31 kg, the gross weight is 0.522 kg and the package measures 19 by 9.7 by 8.5 cm. Those figures make the unit easy to ship and to store in a clinic drawer. The page does not give a full charge time or a battery capacity, so a buyer should ask for both if the motor will be used for several cases in a day. A spare battery or a second motor may be the practical answer for a busy implant schedule, and that decision should be made with the supplier.

Who the Motor Suits

The motor suits an implant clinic that wants a cordless unit with a visible torque setting and an automatic stop, and it also suits a dealer who supplies implant equipment to several clinics. It sits in the JERRY implant category next to the other products on the site, which include electric motors, curing lights, endodontic units and burs. A clinic already using a competitor motor should compare the torque range, the contra angle ratio and the driver connection before switching, because the implant system and the driver set are usually the limiting factor.

About JERRY and Ordering

JERRY was founded in 2010 in Foshan, Guangdong, and describes itself as a dental equipment enterprise that combines research, production, sales and service. The contact email on the page is elise@jerrymed.com and the phone number is +86 757 86637775. For an order, a buyer should send the model, the quantity, the plug type and the destination, and ask for the manual, the driver list, the warranty terms and the packing details in the quotation. A clinic that needs a demonstration should ask for a video of the motor reaching a set torque and stopping, because that shows the function more clearly than a specification line.

The dental implant motor with torque control is a small unit with a direct effect on the implant procedure. The JERRY i Motor offers a 10 to 50 N.cm range, 10 to 50 rpm, a 20:1 contra angle, forward and reverse modes and an automatic stop at the set torque. A clinic should confirm the calibration method and the driver connection, and a dealer should confirm the manual and the warranty before the first order. With those checks, the motor can fit the torque protocol and the handpiece system already in use.